Buzzrack Buzzybee 4T Trunk Bike Carrier – 4-Bike Setup

Description

If you don’t need a bike rack with a tilting function to access the trunk, then the BUZZYBEE platform rack is the best possible option on the market. BUZZYBEE series offer convenient mounting, basic functions and compact storage. The rubber pad offers a good solution for carbon frames fitting as it does not apply pressure to the carbon tubes.

TOWBALL ATTACHMENT

The patented conic system fits onto all ISO 50mm diameter tow balls. Easy to use and secure. The system can be locked using the locking knob. The special Buzz wrench is included for the installation of the product on the tow ball.

ASSEMBLY

Even though it is not assembled, BUZZYBEE 4 is very easy to put together: assemble the wheel support frame to the base using 8 screws, assemble the light support with 2 more screws, install the license plate, slide in the plastic wheel supports, fit the rack to the tow ball with no tools needed and you are ready to go!

SECURE

When you first place the BUZZYBEE 4 on the tow ball it supports itself – you can let go of it and it won’t fall to the ground. You’ll then take the weight again, spin the tightening knob until it’s tight, and lock it. BUZZRACK‘s carriers comply with the very exacting standard XPR-18-904-4 and therefore include an anti-sway tensioner; this has an integrated handle and 2 or 3 turns are usually sufficient. The video below shows the fitting to the car and the installation of bikes.

LIGHTS

The BUZZYBEE 4 comes with a 7 pin lighting system. 7 pin to 13 pin adapter is not included. The full length light board delivers excellent visibility, clearly displaying brake and indicator lights.

FEATURES

• The wheel holders will accommodate most wheelbases, even small children’s bikes. You can reverse the wheel supports for the really small bikes. See technical data below
• The long wheel rubber-padded wheel straps hold tyres up to 3.25” wide; pull on them to tighten, and use the quick release to loosen
• The BUZZYBEE 4 is entirely suitable for carbon frame bikes; the rubber bike frame pads and high resistance straps hold any type of tube firmly but gently.
• The maximum permitted load is 60kg, with no bike weighing more than 20kg
• The down tube size is limited to 75mm diameter (3″); whatever bikes you have, always load the heaviest bikes nearest to the car
• The patented conical fitting fits to all tow balls, even to the bolt-on tow balls we see occasionally that do not meet standards for neck length or ball diameter.
• A reminder that it locks to the tow ball.
• The BUZZYBEE 4 sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. The whole carrier looks and feels like the class act it is. All tools you might need are provided.
• All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
• Not suitable for trailers, campers, or RVs

SPECIFICATIONS

Max number of bikes	4
Max weight per bike	20kg
Max load capacity	60kg
Max tire size	3.25 inches
Max bike frame down tube size	diameter 75mm (3″)
Fits all ISO 50mm tow ball	Yes
Dimensions (width x depth x height)	88 x 96 x 74cm (Height 28cm when folded)
Weight	15.5kg
Tilting	No
Integrated lighting board	Yes
Lighting board plug type	7 pin (7 pin flat plug for AUS/NZ)
Bike carrier to tow ball lock	Yes
Bike carrier to bike lock	No
Notes	The maximum permitted load you can carry is also determined by the tow bar nose weight. // Requires 65mm clearance from center of tow ball to rear of vehicle.

.video-container { position: relative; max-width: 800px; /*maximum width*/ margin: 0 auto; /* Center the video horizontally */ padding-bottom: 30%; /* 16:9 aspect ratio (height: 9 / width: 16) */ padding-top: 30px; height: 0; overflow: hidden; } .video-container iframe { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explore more from our collection.